Technical data
Power RMS ≤ 1% THD+N @ 14.4 V
– @ 4 Ohms 6 x 100 Watts
– @ 2 Ohms 6 x 190 Watts
– @ 1 Ohm –
– bridged @ 4 Ohms 3 x 380 Watts
– bridged @ 2 Ohms –
Max. output power per channel* Up to 240 Watts RMS @ 2 Ohms
Up to 480 Watts RMS @ 4 Ohms bridged
Amplifier technology Class D
Inputs 6 x RCA / Cinch
or
6 x Highlevel speaker input
1 x Optical SPDIF (12 – 96 kHz)
2 x Remote In
Input sensitivity RCA / Cinch:1 – 8 Volts
Highlevel: 2 – 16 Volts
Input impedance RCA / Cinch 4,8 kOhms
Highlevel 9 – 33 Ohms or 20 kOhms with ADEP.3
Outputs 6 x Speaker output
2 x RCA / Cinch
1 x Remote Out
Output voltage RCA / Cinch 8 Volts
Frequency response 20 Hz – 22,000 Hz
DSP resolution 64 Bit
DSP power 1 x 295 MHz (1.2 billion MAC operations/second)
Sampling rate 48 kHz
DSP type 1 x Audio signal processor
Signal converters A/D: BurrBrown 24 Bit
D/A: AKM 24 Bit
Signal-to-noise ratio (A-weighted) Analog input: 99 dB @ full power
Digital input: 102 dB @ full power
Distortion (THD @ 1 kHz, 1 W into 4 Ohms) 0.005 %
Distortion (THD+N @ 1 kHz, 1 W into 4 Ohms) 0.02 %
Distortion (THD @ 100 Hz, 1 W into 4 Ohms) –
Distortion (THD+N @ 100 Hz, 1 W into 4 Ohms) –
Damping factor 70
Operating voltage 10.5 – 16 Volts (max. 5 sec. down to 6 Volts)
Power rating DC 12 V ⎓ 93 A max.
Idle current 1,100 mA
Max. remote output current 500 mA
Operating temperature range -40 °C to +70 °C
Fuse 3 x 25 A LP-Mini-fuse (APS)
Additional features ADEP.3 circuit, Smart Control Port, Auto Remote switch, 32 Bit CoProcessor
Dimensions (H x W x D) 40 x 263 x 114 mm / 1.58 x 10.35 x 4.49”
* One channel driven (≤ 10 % THD+N @ 14.4 V)
Scope of delivery
1 x Amplifier HELIX AMPLIFY 206 DSP
2 x Allen key
1 x Mounting material
5 x Connection cable
1 x USB cable
3 x Fuse
1 x Instruction manual







Recensioner
Det finns inga recensioner än.