Installationskitt FK-310-2

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in a Saab 9-5 (2006 – 2010).

 

This complete fitting kit includes the following:

 

SAAB Bose/Harmon Kardon amplifier ISO adapter 

This interface converts the high level audio output of a new head unit to a low level pre amplified signal which will work with an amplifier. 4 adjustable channels for optimum audio quality, it has a built in ground loop isolator and filters to get the best sound from the amplifier.

 

Fakra to DIN car aerial antenna adapter cable

Male Fakra to Male DIN car aerial antenna adapter cable. This cable adapts from a Fakra connector in the car to a standard aftermarket DIN antenna connector, this is used when fitting an aftermarket stereo upgrade.

 

Steering wheel control interface 

Saab Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit. Use with Saab cars with GM LAN bus connectors behind the radio. Does not include Telephone answer and reject features. This model is universal and can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony or Zenec Head-units. It is supplied complete with instructions on how to code the head-unit to the interface.

 

UNICAN patch lead set

Patch cable set to connect a UNICAN interface between an after market head unit and the steering wheel controls. Can be used with Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive learning head units with either two wires or a 3.5mm jack.

 

Saab 9-5 mk1 facelift (2006-2010) Single/Double DIN fascia

Replacement car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket version. Fits Saab 9-5 mk1 facelift (2006-2010) car models (WITH ORIGINAL GM RADIO. A removable pocket is included for Single DIN installation.

COLOUR: MATT BLACK

If using for double din you will need to cut out the central bar and will require a standard 113mm high metal cage as used by most aftermarket head-unit manufacturers. This cage is normally provided with the unit. 

 

PLEASE NOTE: This fitting kit comes with a universal patch lead which can be used with Alpine, Kenwood, JVC, Pioneer, Sony and Chinese/ Resistive learning Head-units.